Creator CR-UART8 Manual de usuario descargar pdf (Pagina 2)

Definition:

01: COM1passage

02: COM2passage

03: COM3passage

04: COM4passage

05: COM5passage

06: COM6passage

07: COM7passage

08: COM8passage

00： 300 bits/s

01： 600 bits/s

02： 1200 bits/s

03： 2400 bits/s

04： 4800 bits/s

05： 9600 bits/s

06： 14400 bits/s

07： 19200 bits/s

08： 38400 bits/s

09： 57600 bits/s

The data length of NET485 is measured by Byte

The data length of RS-232 is measured by Int

*cannot be 0x00

Note：

\x1B\x43\xDD\x0D\x0A\x07\x00\x00\x00\x03\x01\x02\x03

↓ ↓ ↓

Channel Parity Baud rate

\x1B\x43\xDD\x0D\x0A\x01\x00\x05\x00\x03\x01\x02\x03（This code is the one sent by the first com port,

baudrate is 9600, no parity,

“

010203

”

）

From PGMII to UART8 using direct line, from UART8 to PGMII using indirect line.

CR-UART8 Function Instruction

1. Function Description

1) Signal input/ output: two RS-232 ports for communicating with the Controller;

Eight delivery outlets COM1~COM8 (RS-323) for signal outputting.

2) Working Theory: This equipment communicates with the Controller by RS-232. It can transfer the

data delivered by the Controller into the allocated baud rate, and put out the result in the

corresponding outlet from COM1 to COM8.

2. Technical Parameters

Dimension:

480x128x38

Weight:

1kg

Input Power:

DC8V~ DC24V

Working

Environment:

-10

C ~ 60

Communication

Parameters:

Refer to the concrete communication protocol of this type of

machine

Working Current:

35mA

Static Current:

26mA

Power

Consumption :

Max. : 0.85W

3. Test

1） Communication Test：

Connect it to the 485 network, use inquire command to detect this device. The NET light won

’

be on if can not detect that it is working.

Use SSCOM to send data to RS-232 input port, and then test whether the feedback is correct.

At the same time, watch whether the LED light will be on or not.

All things are OK if the test above passed.

2） ID Test：

Set the ID as 01,12,24,48,80, inquire these status and when they can not be detected, that means

the circuit is normal.

1 2

Controller 1

Comentarios a estos manuales

Sin comentarios

Creator CR-UART8 Manual de usuario Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios de comunicación Creator CR-UART8